Home > Products >  woking pressure 10 bar oil hose 1/4
Email:[email protected]

Leave a Reply

woking pressure 10 bar oil hose 1/4

SPIR STAR® High Pressure Performance - SPIR STAR® Your Specialists in High Pressure Hose: High pressure hose - Thermoplastic hose …

SPIR STAR offers water-blast hoses with a maximum working pressure of up to 4.000 bar (safety factor of 2,5:1). High-Pressure Hydraulics SPIR STAR® thermoplastic high-pressure hoses are developed and produced for high working pressures up to 1.800 bar (safety factor 4:1).

woking pressure 10 bar hydraulic oil resistant hose

woking pressure 10 bar hyd hose inside diamater 1 4 inch High Pressure Rubber Hose Wire Type Technical … * Wire braided high pressure hose type R7 as per SAE 100 in 1 wire & 2 wire from 10mm I.D. to 50mm for w.p. 10 bar & 14 bar respectively & temp

SAE 100R1AT Specs | Hose and Fittings Source

1 High Tensile Steel Wire Braid. Black, Oil, Weather and Abrasion Resistant Synthetic Rubber. MSHA Approved. Safety Factor: 4:1. Temperature Range: -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C) Maximum Temperature Recommended for Air 140°F

INDUSTRIAL HOSE & FITTINGS - Dunlop Hiflex

Working pressures and vacuum ratings for hose are based at aient temperature of 20 C (68 F) mm inch mm inch bar psi mm inch % kg/m lb/ft 40 1 9/16 20 0,75 0,110 0,075 51 2 25 1,00 0,135 0,095 63 2 1/2 32 1,25 0,170 0,115 70 2 3/4 35 1 80 3 1/8

High Pressure Hydraulic Hose, 1SN, 2SN, 4SP, 4SH, R13 and R15

Our standard high pressure hydraulic hose 1SN can in -40 C to +100 C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar.

Flexible Hoses & Braided PTFE Stainless Steel Hose Fittings

Hose Fittings & Flanges If you need hose pipe fittings – including high-pressure hose fittings – then Proflex Hose can help you. We are able to provide a range of hose pipe fittings and flanges to suit any appliion you may need – just get in touch with us on 01257 220 010 or, if you’ve got an account on this website, use the online order form on this page to place an order!

SAE 100R1 Wire Braided Medium Pressure Hose with Two Options

Hose I.D. Reinforcement Max. Working Pressure (Type AT) Max. Working Pressure (Type S) Min Bend Radius Weight Min Max Min Max psi bar psi bar mm kg/m MR1-3 5 3/16-3 4.6 5.4 8.9 10.1 3045 210 3625 250 90 0.2 MR1-4 6.3 1/4-4 6.2 7 10.6 11.7 2780

Pipe Working Pressure Calculator - Tube Tubing Working Pressure …

P = Fluid Pressure (psi) T = Pipe Wall Thickness (in) O.D. = Pipe Outside Diameter (in) SF = Safety factor (General Calculations 1.5 – 10, Use 1 For Bursting Pressure) S = Material Strength (psi) Ultimate Tensile strength or Yield strength can be used.

SAE 100R1AT Specs | Hose and Fittings Source

1 High Tensile Steel Wire Braid. Black, Oil, Weather and Abrasion Resistant Synthetic Rubber. MSHA Approved. Safety Factor: 4:1. Temperature Range: -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C) Maximum Temperature Recommended for Air 140°F

Hydraulic Hose Ratings: Working Pressure Vs Burst Pressure

Working Pressure vs Burst Pressure. All Parker hydraulic hoses offer a 4:1 safety factor, which means if the hose is rated at 5,000 psi working pressure, the burst pressure will be 20,000 psi. Keep in mind, the lowest rated component gives the overall assely’s working pressure rating. Just because a hose assely is rated to 5,000 psi doesn

SAE 100R6 Low Pressure Hydraulic Hose for High Temp …

Hose I.D. Hose O.D. Max. Working Pressure Min. Burst Pressure Min Bend Radius Weight Min Max Min Max psi bar psi bar mm kg/m LR6-3 5 3/16-3 4.2 5.4 10.3 11.9 510 35 2040 140 50 0.11 LR6-4 6.3 1/4-4 5.6 7.2 11.9 13.5 410 28 1640 112 65 0.13 LR6-5 8

How We Calculate Maximum Allowable Working Pressure (MAWP) - Penflex - Penflex - Flexible Metal Hose …

This gives the assely a safety factor of 4:1. To establish Maximum Allowable Working Pressure, a straight hose assely with a live length equal to ten (10) times its nominal diameter, but not less than twenty (20) inches, is subjected to gradually increasing

Air & Multipurpose Hoses – Industrial Hoses – Eaton Hydraulics

Pressure: 10,5 bar / 150 psi Specialty Hoses: EHW028 - Heavy Duty MSHA Mine Spray Hose Tube: Oil-mist resistant nitrile blend Reinforcement: High-tensile steel wire Cover: MSHA pin-pricked neoprene Temp: -35 C to +100 C, (-31 F to +212 F) Pressure: 70

SAE Hydraulic Hose – Ideal for Low, Medium and High Pressure Working

SAE 100R3 double fiber braid hydraulic rubber hose is ideal for medium pressure fuel and oil lines as well as return and suction hoses of hydraulic systems. It is constructed with an inner tube of oil-resistant synthetic rubber, a reinforcement consisting of a ply, or plies, of woven or braided textile fibers with a suitable spiral of body wire, and an oil and weather resistant synthetic

How We Calculate Maximum Allowable Working Pressure (MAWP) - Penflex - Penflex - Flexible Metal Hose …

This gives the assely a safety factor of 4:1. To establish Maximum Allowable Working Pressure, a straight hose assely with a live length equal to ten (10) times its nominal diameter, but not less than twenty (20) inches, is subjected to gradually increasing

PTFE HOSE 8

9 10 9 PTFE Hose - PTFE PTFE HOSE PTFE HOSE 1 2 3 4 5 6 7 1.05 8 * Please note that Hoseflex PTFE HOSE meets and exceeds the stated working and burst pressure values

PTFE HOSE 8

9 10 9 PTFE Hose - PTFE PTFE HOSE PTFE HOSE 1 2 3 4 5 6 7 1.05 8 * Please note that Hoseflex PTFE HOSE meets and exceeds the stated working and burst pressure values

How We Calculate Maximum Allowable Working Pressure (MAWP) - Penflex - Penflex - Flexible Metal Hose …

This gives the assely a safety factor of 4:1. To establish Maximum Allowable Working Pressure, a straight hose assely with a live length equal to ten (10) times its nominal diameter, but not less than twenty (20) inches, is subjected to gradually increasing

How We Calculate Maximum Allowable Working Pressure (MAWP) …

This gives the assely a safety factor of 4:1. To establish Maximum Allowable Working Pressure, a straight hose assely with a live length equal to ten (10) times its nominal diameter, but not less than twenty (20) inches, is subjected to gradually increasing

Dura Hose and Fittings Limited | UK’s leading industrial hose …

We are the UK’s leading industrial hose supplier offering a comprehensive range of industrial rubber hose for almost every industry. In addition, we produce, test and repair hose asselies to customer specifiion. Established for more than 30 years and with over

Hose | Parker NA

Hose. Parker offers the widest range of specialty, industrial, hybrid and hydraulic hose in the industry. Our comprehensive line includes low pressure, medium pressure and high pressure pneumatic and hydraulic hoses that are resistant to heat, ozone, weather, chemicals, oil, flames, UV and abrasion. Parker is the largest hose manufacturer in

Petroleum Hose - Tank Truck - Novaflex

48 Novaflex 3253 Tank Truck Hose Nitrile tube designed for use with oil, gasoline and other petroleum products. Ideal for pressure, gravity flow or suction service from tank trucks, tank cars or bulk plants. Steel wire helix is spiraled between multiple plies of tire cord

Hydraulic Hose Ratings: Working Pressure Vs Burst Pressure

Working Pressure vs Burst Pressure. All Parker hydraulic hoses offer a 4:1 safety factor, which means if the hose is rated at 5,000 psi working pressure, the burst pressure will be 20,000 psi. Keep in mind, the lowest rated component gives the overall assely’s working pressure rating. Just because a hose assely is rated to 5,000 psi doesn

Air & Multipurpose Hoses – Industrial Hoses – Eaton Hydraulics

Pressure: 10,5 bar / 150 psi Specialty Hoses: EHW028 - Heavy Duty MSHA Mine Spray Hose Tube: Oil-mist resistant nitrile blend Reinforcement: High-tensile steel wire Cover: MSHA pin-pricked neoprene Temp: -35 C to +100 C, (-31 F to +212 F) Pressure: 70

SAE 100R1AT Specs | Hose and Fittings Source

1 High Tensile Steel Wire Braid. Black, Oil, Weather and Abrasion Resistant Synthetic Rubber. MSHA Approved. Safety Factor: 4:1. Temperature Range: -40°F to 212°F (-40°C to 100°C) Intermittent Service 248°F (120°C) Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C) Maximum Temperature Recommended for Air 140°F

High Pressure Hose | Parker NA

High pressure wire hose with PA11 core tube - 2240N Parker 2240N Hoses for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. For working pressure up to 43 MPa.

How We Calculate Maximum Allowable Working Pressure (MAWP) - Penflex - Penflex - Flexible Metal Hose …

This gives the assely a safety factor of 4:1. To establish Maximum Allowable Working Pressure, a straight hose assely with a live length equal to ten (10) times its nominal diameter, but not less than twenty (20) inches, is subjected to gradually increasing

Industrial Rubber Hose

Industrial Rubber Hose Industrial Rubber Hose 10 BAR WATER DELIVERY Coil Lengths = 20mt/61mt. Code I.D.mm O.D.mm W.P Bar Weight kg/mt Availability RWD1-0050 12 10 0.35 Stocked RWD1-0075 19 28 10 0.54 Stocked RWD1-0100 25 34 10 0.66 Stocked

SPIR STAR® High Pressure Performance - SPIR STAR® Your Specialists in High Pressure Hose: High pressure hose - Thermoplastic hose …

SPIR STAR offers water-blast hoses with a maximum working pressure of up to 4.000 bar (safety factor of 2,5:1). High-Pressure Hydraulics SPIR STAR® thermoplastic high-pressure hoses are developed and produced for high working pressures up to 1.800 bar (safety factor 4:1).

High Pressure Rubber Hose Wire Type Technical Specifiion | …

* Wire braided high pressure hose type R7 as per SAE 100 in 1 wire & 2 wire from 10mm I.D. to 50mm for w.p. 10 bar & 14 bar respectively & temp. resistant upto 200 0 C. Stainless steel hose SS wire braid bellows for temperature upto 600 0 c also manufactured.